In the mold steel processing industry, how to improve the efficiency of mould milling is always a major issue.

In the mold steel processing industry, how to improve the efficiency of mould milling is always a major issue.

The emergence of the milling machine is undoubtedly to bring good news to manufacturers, but with the market demand changes, the traditional milling machine will not be able to meet the needs of manufacturers.

The traditional single-sided milling machine on the market, most of them are only a single single surface milling function, processing the opposite side of the need for manual loading and unloading, processing feed and spindle speed is also based on demand at any time manually adjusted, which greatly slows down the processing efficiency, making the manufacturers 's competitiveness is reduced.

At this time, the CNC milling machine appeared, through the CNC system to control the processing axis of the feed and spindle cutting amount, and then through the addition of servo rotary table, eliminating the need to manually turn the workpiece link, and can complete a simple four-side chamfering.

However, the single-sided milling machine is still unable to meet the demand for simultaneous machining of both sides, resulting in a limited increase in overall efficiency.

In order to solve this situation, CNC double side milling machine came into being.

It can simultaneously mill both sides of the mould steel parts with high precision, with intelligent parameter setting, significantly reducing the processing time.

At the same time, the integrated tool monitoring and error compensation function ensures the accuracy and stability of long-time continuous machining, which significantly improves the production efficiency and quality of finished products.

Existing CNC double side milling machines on the market are mainly equipped with belt spindles as well as gearbox spindles.

Gearbox spindles have a higher cutting torque and feed depth than belt head spindles, so they are the first choice of mould steel processors when pursuing deeper machining feeds.

But the gear box due to structural reasons, in addition to processing noise, itself also need regular lubrication as well as maintenance, and prone to problems need to stop for after-sales service.

In this situation, BOHO has applied electric spindles to double side milling, a technological innovation to the double side milling we produce.

Boho electric spindle double side milling compared with the general gearbox spindle double side milling, torque has been greatly improved, the same 300mm diameter cutter, cutting feed increased by at least 30%, in the hard material processing and large mould steel milling, there will be more obvious advantages.

And due to the relative simplicity of the mechanism, the failure rate is low, no spindle backlash makes the accuracy performance better, coupled with less noise, for the environment noise control has been significantly improved.

Boho Electrical spindle CNC Double Side Milling is focused on improving your mould steel machining efficiency.